• Metcal CV-PS500 Connection Validation Soldering System, Power Supply Only, 40W
1 1

Metcal

Metcal CV-PS500 Connection Validation Soldering System, Power Supply Only, 40W

Metcal CV-PS500 Connection Validation Soldering System, Power Supply Only, 40W

MET-CV-PS500

$654.00
$654.00
Sale Sold out
Shipping calculated at checkout.

Metcal CV-PS500 Connection Validation Soldering System 40W Power Supply

Metcal soldering stations have led the way with SmartHeat® technology for 35 years. SmartHeat senses the thermal load and instantly delivers Power on Demand directly to the joint.

The embedded, self-regulating heater delivers the right amount of power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required. The intermetallic compound thickness is critical in the formation of a solder joint. Connection Validation (CV) evaluates the quality of the solder joint by calculating the intermetallic compound formation and provides closed loop feedback to the operator. CV provides feedback to the operator via the LED light ring integrated in the hand-piece. It takes the risk associated with the variables involved in the soldering activity and removes the success and failure determination of a good solder joint out of the hands of the operator. CV complements the skill of the operator to judge the quality of a solder joint by introducing an objective method of evaluating solder joint quality. This systemic and objective approach provides repeatability and a measureable standard to the soldering process.

Features and Benefits

  • SmartHeat Power on Demand Technology
  • Patented Connection Validation IMC Formation Technology
  • 2.8” color touchscreen with bold graphics
  • Communications Port for process traceability data and firmware graphics
  • Precise tip temperature display
  • Integrated Net Power Meter and power graph
  • Password protection
  • Patented Chip-in-Cartridge technology
    • Closed loop bi-directional communication
    • Stores and records cartridge attributes
    • Provides traceability information
    • Protects power supply from non-conforming cartridges
    • Backwards compatible with MX series power supplies

DOWNLOAD: Technical Data Sheet

NOTE: No tip/cartridge included, Power supply ONLY

Technical Specifications:

Ambient Operating Temp. 10 to 40 °C
Max. Enclosure Temp. 55°C
Input Line Voltage 100 – 240 VAC, grounded circuit
Input Line Frequency 50/60 Hz
Rated Power Consumption 85W max
Output Power Variable, 40W max.
Output Frequency 13.56 MHz
Heating Method Induction
Display 2.8” Color TFT LCD Display
Resolution 320*240 RGB
Size 2.8” Diagonal
Active Area 43.20 x 57.60 mm
Connections 2 Single Ports, switchable
Communications USB
Power Supply Dim. w x d x h (mm) 121 x 121 x 220
Power Supply Weight (kg) 2.65
Certification / Marking CE TUV
Tip-to- Ground Potential <2mV
Tip-to-Ground Resistance <2ohms
Idle Temperature Stability 1.1°C in still air
Tip Temperature Accuracy Meets or exceeds IPC J-STD-001 Standard
Hand-piece cable length
Hand-piece connectors
RF Connector F type power connector
LED Power Connector 6 pin DIN
Operation 2 single ports
Firmware upgrade Via USB port and appropriate software with compatible computer and cables.

 

View full details