Hakko FX100 Induction Heat Soldering Station

HAKKO FX100 INDUCTION HEAT SOLDERING SYSTEM

The FX-100 soldering system brings induction heat soldering technology to an even higher performance level. This small, compact station includes microprocessor control that boost the recovery performance of the soldering iron tip, and an Advanced System Design optimizes performance by reducing the loss of power in the system while maintaining the lowest EMI levels to meet applicable standards, especially for work with sensitive devices.

The system is simple to operate — just plug it in and turn it on. No calibration required.

• User selectable Power Activity Display providing constant dynamic feedback to the operator about the thermal load on the soldering iron tip
• T31 Series Tip Cartridges provide HAKKO’s renowned tip life with greater power at each of the two temperature selections
• Password Lockout prevents unauthorized system setup changes
• Tip Sleep function reduces tip temperature to preserve tip life and reduce oxidation when the iron is not in use
• Large Backlit Display provides a clear and simple interface with the operator
• User Programmable Profiles for tip and solder selection
• Activity Monitor provide cumulative data on tip heater loads and tip running time to aid in process control and managing operating costs
• Auto-Power Off safety feature
• Compact design minimizes the workbench footprint
• Slender, lightweight, and ergonomically designed handpiece with burn resistant cord allowing for excellent operator dexterity
• Meets or exceeds requirements under IPC J-STD-001, ANSDI ESD S20.20 and older MIL-STDs.

FX-100 SOLDERING STATION

Model Name	FX100
Part Number	FX100-04
Voltage	120V
Power Consumption	85W
Temperature Stability & Accuracy	Meets or Exceeds UPC J-STD-001
Output Power	50W
Output Frequency	13.56 MHz
Weight	6.6 lb. (3 kg)
Dimensions (W x H x D)	5.0 x 5.9 x 6.6 in. (127 x 150 x 167 mm)

SOLDERING IRON - HANDPIECE

Model Number	FX-1001
Part Number	FX1001-51
Tip-to-Ground Resistance	< 2 ohms
Tip-to-Ground Potential	< 2mV
Length of cord	4.3 ft. (1.3 m)
Total Length (w/o cord)	7.5 in. (190 mm) w/T31-02D24 tip
Weight (w/o cord)	0.07 lb. (31 g) w/T31-02D24 tip
Tips (not included)	T31-01 Series = 840°F (450°C) T31-02 Series = 750°F (400°C)
Reach	4.3 ft. (1.3m)
Heating Element	High Frequency Induction-Type

CONTENTS

Part Number	Description
FX100-04	FX-100 Soldering Station w/ FX-1001 Soldering Iron
FH800-51BY	Iron Holder
B2300	Heat resistant pad
B2419	3-wire Power Cord
B5006	Yellow Soldering Iron Grip (Installed)
B5007	Green Soldering Iron Grip
B5008	Gray Soldering Iron Grip
N/A	Instruction Manual

 

APPROVED