Hakko C5016 Bottom Heater (for Integration w/FR-811)

The HAKKO C5016 bottom heater integrates and is fully controlled by the HAKKO FR-811 SMD hot air rework system with the execution of the user-programmable rework profiles that are stored on the HAKKO FR-811.

The heater can be operated in power or thermocouple mode, including the ability to monitor and control the ramp rate of the assembly.

NOTE: The HAKKO C5016 must be used with the FR-811. It will not work on its own or with any other units.

• Contents:
• C5016 Bottom Heater
• B2419 Power Cord
• Connecting Cable

Features:

• Input Voltage: 120 VAC 50/60 Hz
• Power Consumption: 730W
• Effective Heater Area: 7.5 x 3.2 in. (190 x 80 mm)
• Board Capacity: 9.8 x 5.5 in. (248 x 140 mm)
• Heating Zones: 2
• Operating Modes: Power / Thermocouple
• T/C Range: 122-482°F (50-250°C)
• T/C Stability: ±9°F / ±5°C
• Power Range: 1 - 100% (1% increments)
• Heater Control: Requires FR-811
• Heater Type: High Efficiency Carbon Filament
• Heater Lamp: MTBF ~ 2100 hours
• External Connections: 4-pin DIN for FR-811 ONLY
• Dimensions (W x H x D): 11.6 x 2.6 x 9.7 in. (295 x 66 x 246 mm)
• Weight: 4.6 lb. (2.1 kg)
• ESD Safe: Yes

† Unit is completely controlled by the HAKKO FR-811 SMD Rework System. Requires connecting cable (included).
1 Airflow capacity is rated as free flowing. Restrictions created by various nozzles may reduce the maximum airflow capacity.
2 Under certain airflow and temperature setting conditions, the station may not attain the maximum allowable temperature.