Features:

• Static Dissipative Cross-Linked Floor Finish
Used to convert hard non-ESD floors to ESD protective flooring and for use in protecting and enhancing ESD permanent flooring (vinyl, VCT, rubber)
• Dissipative (1 x 10⁶ to < 1 x 10¹⁰ ohms) Coating - ANSI/ESD S7.1 and ESD TR53
Meets or exceeds ANSI/ESD S20.20 minimum requirements as an ESD protective floor or as a primary grounding method
• Low Tribocharging (<100 volts) Coating - ANSI/STM 97.2
Meets or exceeds ANSI/ESD S20.20 minimum requirements for charge generation on flooring.
• 18% Solids- 3 Coat System
Reduces labor needed for initial install and on-going maintenance of the floor
• UL Listed for Slip Resistance
Tested by Underwriters Laboratory to their slip resistance standards to ensure employee safety and to mitigate user’s liability exposure
• Bag-In-Box Packaging
• Lead-free RoHS Compliant
• Trouble shoot common floor care problems. Click HERE.
• Made in the United States of America

Click Here for Clean Room and Raised Floor application instructions

TB-7042- Statguard® Static Dissipative Floor Finish - Application Instructions

SDS-7042-US - Statguard® Static Dissipative Floor Finish - SDS - US

Safe Walking Surface:

Classified by UL as to slip resistance only, Statfree® and Statguard® provide superior electrical properties along with a safe walking surface. Underwriters Laboratory has evaluated Statfree® and Statguard® and tested them to their slip resistance standards. To ensure employee safety and to mitigate user's liability exposure, it is important to use floor finish that has been successfully tested for slip resistance, and is properly applied and maintained.