Metcal CV-5210 Connection Validation Soldering System with Handpiece, Workstand and Accessories

MET-CV-5210

Metcal CV-5210 Connection Validation Soldering System with Handpiece, Workstand and Accessories

Metcal CV-5210 Connection Validation Soldering System with Handpiece, Workstand and Accessories

MET-CV-5210

Regular price $1,052.00
Shipping calculated at checkout.

Only 996 items in stock!

Metcal CV-5210 Connection Validation Soldering System

Metcal soldering stations have led the way with SmartHeat® technology for 35 years. SmartHeat senses the thermal load and instantly delivers Power on Demand directly to the joint.

The embedded, self-regulating heater delivers the right amount of power based on the requirements of the solder joint. This provides a fast, safe and repeatable process with no calibration required. The intermetallic compound thickness is critical in the formation of a solder joint. Connection Validation (CV) evaluates the quality of the solder joint by calculating the intermetallic compound formation and provides closed loop feedback to the operator. CV provides feedback to the operator via the LED light ring integrated in the hand-piece. It takes the risk associated with the variables involved in the soldering activity and removes the success and failure determination of a good solder joint out of the hands of the operator. CV complements the skill of the operator to judge the quality of a solder joint by introducing an objective method of evaluating solder joint quality. This systemic and objective approach provides repeatability and a measureable standard to the soldering process.

Features and Benefits

  • SmartHeat Power on Demand Technology
  • Patented Connection Validation IMC Formation Technology
  • 2.8” color touchscreen with bold graphics
  • Communications Port for process traceability data and firmware graphics
  • Precise tip temperature display
  • Integrated Net Power Meter and power graph
  • Password protection
  • Patented Chip-in-Cartridge technology
    • Closed loop bi-directional communication
    • Stores and records cartridge attributes
    • Provides traceability information
    • Protects power supply from non-conforming cartridges
    • Backwards compatible with MX series power supplies

DOWNLOAD: Technical Data Sheet

NOTE: No tip/cartridge included

Technical Specifications:

Ambient Operating Temp. 10 to 40 °C
Max. Enclosure Temp. 55°C
Input Line Voltage 100 – 240 VAC, grounded circuit
Input Line Frequency 50/60 Hz
Rated Power Consumption 125W
Output Power 80W max.
Output Frequency 13.56 MHz
Heating Method Induction
Display 2.8” Color TFT LCD Display
Resolution 320*240 RGB
Size 2.8” Diagonal
Active Area 43.20 x 57.60 mm
Connections Single Port
Communications USB
Power Supply Dim. w x d x h (mm) 121 x 130 x 235
Power Supply Weight (kg) 3.35
Certification / Marking CE TUV
Tip-to- Ground Potential <2mV
Tip-to-Ground Resistance <2ohms
Idle Temperature Stability 1.1°C in still air
Tip Temperature Accuracy Meets or exceeds IPC J-STD-001 Standard
Hand-piece cable length L=183cm (72”), burn proof, ESD safe
Hand-piece connectors
RF Connector F type power connector
LED Power Connector 6 pin DIN
Operation 2 single port or dynamic dual simultaneous
Firmware upgrade Via USB port and appropriate software with compatible computer and cables.

 

You may also like


Recently viewed